Deceleration Stepper Motor

- Oct 31, 2018 -

The stepper motor speed is reduced, of course the torque is increased and the speed will be 1/64. The torque is 64 times that of the previous one. The difference is that the stepper motor adds a reducer. And change the original parameters of the stepper motor.

 

Planetary gearbox performance and features:

1, the planetary gear transmission interface uses full needle bearing without cage, increasing contact area, improving structural rigidity and output torque;

2. Using 3D / PORE design and analysis technology, trim the contour and lead length of the spiral tooth surface, reduce the impact and noise of the gear on the rodent in and out, and improve the service life of the gear train. ;

3. The gear material is made of high quality chromium, molybdenum and vanadium alloy steel. It is heat treated by tempering and the hardness of the substrate is 30HRC. The surface hardness of the gear is nitrided to 840 HV using advanced ion nitriding equipment for optimum wear resistance and impact toughness.

4. The planetary arm and the output shaft adopt an integrated structure design, and the output shaft bearing configuration adopts a large span design to ensure the maximum torsional rigidity and output load capacity;

5. The interface of the oil seal at the output end adopts advanced titanium nitride (TiN) coating. The surface hardness is higher than 2000HV, and the surface roughness is lower than Ra 0.2um, which ensures the minimum friction coefficient and starting torque.

6. Use NYOGEL792D synthetic lubricant, IP65 protection seal design to avoid oil leakage and maintenance;

7, the input end and the motor are connected with a clip-type locking mechanism to analyze the dynamic balance to ensure the power transmission of the interface concentricity and zero backspace at high input speed;

8. The sun gear made of the entire gear rod has strong rigidity and accurate concentricity.

9. Unique motor connection plate and bushing modular design, suitable for any servo motor;

10. The surface of the gearbox is treated with electroless nickel, and the motor connection plate is treated with black anode to improve environmental resistance and corrosion resistance.

11, the gearbox and inner ring gears are integrated design, compact structure, high precision and large output torque.

The design of the planetary reducer design network and the sales of two integrated solutions let more customers know that we believe in us!

Planetary gearboxes are the first choice for servo motors and stepper motors.